View source for Taxiway

{{Short description|Path for moving aircraft at an airport}}
[[File:F-22A Elmendorf AFB.jpg|thumb|right|260x260px|[[F-22 Raptor]]s taxiing at [[Elmendorf Air Force Base|Elmendorf AFB]], Alaska, US]]
[[File:Planes lined up at Denver International Airport.JPG|thumb|Aircraft taxiing to runway, at [[Denver International Airport]]|260x260px]]
[[File:Leipzig-Halle Airport Condor.jpg|thumb|right|A taxiway crossing the [[Autobahn]]|260x260px]][[File:Munich Airport Apron.jpg|thumb|Taxiway at [[Munich Airport]]|260x260px]]
[[File:Mumbai Airport Holding Position.png|thumb|260x260px|Holding Position Marking on a taxiway at [[Chhatrapati Shivaji Maharaj International Airport|Mumbai Airport]]]]
[[File:Holding position sign and marking for instrument landing system (ILS) critical area boundary.png|thumb|Holding position sign (red sign saying "ILS") and marking (in front of the red plane) for instrument landing system (ILS) critical area boundary|297x297px]]A '''taxiway''' is a path for [[aircraft]] at an [[airport]] connecting [[runway]]s with [[Airport apron|aprons]], [[hangar]]s, [[Airport terminal|terminal]]s and other facilities. They mostly have a hard surface such as [[Asphalt concrete|asphalt]] or [[concrete]], although smaller [[general aviation]] airports sometimes use [[gravel]] or [[grass]].

Most airports do not have a specific speed limit for [[taxiing]] (though some do). There is a general rule on safe speed based on obstacles. Operators and aircraft manufacturers might have limits. Typical taxi speeds are {{convert|20|–|30|kn|km/h mph|abbr=on}}.<ref>{{cite web|url=https://www.quora.com/Airplanes-At-what-speed-do-planes-generally-taxi|title=Airplanes: At what speed do planes generally taxi?|date=February 9, 2016|access-date=January 1, 2018}}</ref><ref>{{cite news|author=John Cox|title=Ask the Captain: Making time on the taxiways|url=https://www.usatoday.com/story/travel/columnist/cox/2014/11/23/airport-airplane-taxi-speed/19334661/|work=[[USA Today]]|date=November 23, 2014|access-date=January 1, 2018}}</ref>

== High-speed exit ==
Busy airports typically construct '''high-speed''' or '''rapid-exit taxiways''' to allow aircraft to leave the runway at higher speeds. This allows the aircraft to vacate the runway quicker, permitting another to land or take off in a shorter interval of time. This is accomplished by reducing the angle the exiting taxiway intercepts the runway at to 30 degrees, instead of 90 degrees, thus increasing the speed at which the aircraft can exit the runway onto the taxiway.<ref>{{Cite web|title=FAA TV: High Speed Exit Taxiways|url=https://www.faa.gov/tv/?mediaId=1141|access-date=2021-03-25|website=www.faa.gov|language=en-us}}</ref>

==Markings==
*'''Normal Centerline''' A single continuous yellow line, {{convert|15 to 30|cm|in|0}} in width.
*'''Enhanced Centerline''' The enhanced taxiway center line marking consists of a parallel line of yellow dashes on either side of the taxiway centerline. Taxiway centerlines are enhanced for {{convert|150|ft|m}} before a runway holding position marking. The enhanced taxiway centerline is standard<ref>{{cite web|url=http://www.faa.gov/regulations_policies/advisory_circulars/index.cfm/go/document.information/documentNumber/150_5340-1J|title=FAA Advisory Circular No: 150/5340-1J March 31, 2008 – Standards for Airport Markings|access-date=January 1, 2018}} (canceled and replaced by150/5340-1K)</ref> at all [[Federal Aviation Regulations|FAR]] Part 139 certified airports in the US.
*'''Taxiway Edge Markings''' Used to define the edge of the taxiway when the edge does not correspond with the edge of the pavement. 
**Continuous markings consist of a continuous double yellow line, with each line being at least {{convert|15|cm|in|0}} in width, spaced {{convert|15|cm|in|0}} apart. They divide the taxiway edge from the shoulder or some other abutting paved surface not intended for use by aircraft. 
**Dashed markings define the edge of a taxiway on a paved surface where the adjoining pavement to the taxiway edge is intended for use by aircraft, e.g., an apron. These markings consist of a broken double yellow line, with each line being at least {{convert|15|cm|in|0}} in width, spaced {{convert|15|cm|in|0}} apart (edge to edge). These lines are {{convert|15|ft|m}} in length with {{convert|25|ft|m|adj=on}} gaps. 
*'''Taxi Shoulder Markings''' Taxiways, holding bays, and aprons are sometimes provided with paved shoulders to prevent blast and water erosion. Shoulders are not intended for use by aircraft, and may be unable to carry the aircraft load. Taxiway shoulder markings are yellow lines perpendicular to the taxiway edge, from taxiway edge to pavement edge, about 3 metres.
*'''Surface Painted Taxiway Direction Signs''' Yellow background with a black inscription, provided when it is not possible to provide taxiway direction signs at intersections, or when necessary to supplement such signs. These markings are located on either side of the taxiway.
*'''Surface Painted Location Signs''' Black background with a yellow inscription and yellow and black border. Where necessary, these markings supplement location signs located alongside the taxiway and assist the pilot in confirming the designation of the taxiway on which the aircraft is located. These markings are located on the right side of the centerline.
*'''Geographic Position Markings''' These markings are located at points along low visibility taxi routes (when [[Runway visual range]] is below {{convert|1200|ft|m}}). They are positioned to the left of the taxiway centerline in the direction of taxiing. Black inscription centered on pink circle with black inner and white outer ring. If the pavement is a light colour then the border is white with a black outer ring.
* '''Runway Holding Position Markings''' These show where an aircraft should stop when approaching a runway from a taxiway. They consist of four yellow lines, two solid and two dashed, spaced six or twelve inches (15 or 30&nbsp;cm) apart, and extending across the width of the taxiway or runway. The solid lines are always on the side where the aircraft is to hold. There are three locations where runway holding position markings are encountered: Runway holding position markings on taxiways; runway holding position markings on runways; taxiways located in runway approach areas.
* '''Holding Position Markings for Instrument Landing System ([[Instrument Landing System|ILS]])''' These consist of two yellow solid lines spaced {{convert|2|ft|cm|spell=in}} apart connected by pairs of solid lines spaced {{convert|10|ft|m|abbr=off|spell=in}} apart extending across the width of the taxiway.
* '''Holding Position Markings for Taxiway/Taxiway Intersections''' These consist of a single dashed line extending across the width of the taxiway.
* '''Surface Painted Holding Position Signs''' Red background signs with a white inscription to supplement the signs located at the holding position.

The taxiways are given alphanumeric identification. These taxiway IDs are shown on black and yellow signboards along the taxiways.

==Signs==
{{Commons category|Airport signs}}
Airport guidance signs provide direction and information to taxiing aircraft and airport vehicles. Smaller airports may have few or no signs, relying instead on airport diagrams and charts.

{{Multiple image
| image1            = Airport location sign.svg
| caption1          = Location Sign for a Taxiway
| width1            = 71
| image2            = Airport direction sign.svg
| caption2          = Direction Sign Onto Taxiway Bravo
| width2            = 105
| image3            = Airport no entry sign.svg
| width3            = 71
| caption3          = No Entry Sign
}}

There are two classes of [[signage]] at airports, with several types of each:
[[File:Ben Gurion International Airport taxiway signs.JPG|thumb|260x260px|The signs can often be combined, in this case a direction sign, a location sign, and a runway sign.]]

=== Operational guidance signs ===
*Location signs – yellow on black background. Identifies the runway or taxiway the aircraft is currently on or is entering.
*Direction/Runway exit signs – black on yellow. Identifies the intersecting taxiways the aircraft is approaching, with an arrow indicating the direction to turn.
*Destination signs – black on yellow, similar to the direction signs. They indicate a destination at the airport and always have an arrow showing the direction of the taxi route to that destination. When the inscription for two or more destinations having a common taxi route are placed on a sign, the destinations are separated by an [[interpunct]] (•) and only one arrow is used.<ref>{{Cite PHAK|year=2023|chapter=14|page=12}}</ref>
*Stop Bar signs – white on blue background. The designation consists of the letter S followed by designation of the taxiway on which the Stop Bar is positioned. This sign is not standard.<ref>{{cite web|url=http://en.caa.gov.il/index.php?option=com_docman&task=doc_download&gid=1517&Itemid=|title=AIP Israel Amendment 2.5-1|date=December 16, 2010|access-date=January 1, 2018}} (LLBG AD 2.9 Surface Movement Guidance and Control System and Markings)</ref>
*Other – many airports use conventional [[traffic sign]]s such as [[stop sign|stop]] and [[yield sign|yield]] signs throughout the airport.
[[File:Ben Gurion International Airport 4 taxiway signs.JPG|thumb|260px|The yellow "W2" direction sign in the foreground leading to the black "W2" location sign in the background. The blue "SW 2" sign is non-standard.]]

===Mandatory instruction signs===
Mandatory instruction signs are white on red. They show entrances to runways or critical areas. Vehicles and aircraft are required to stop at these signs until the control tower gives clearance to proceed.

*Runway signs – White text on a red background. These signs identify a runway intersection ahead, e.g., runway 12–30 in the photo above.
*Frequency change signs – Usually a stop sign and an instruction to change to another frequency. These signs are used at airports with different areas of ground control.
*Holding position signs – A single solid yellow bar across a taxiway indicates a position where ground control may require a stop. If two solid yellow bars and two dashed yellow bars are encountered, this indicates a holding position for a runway intersection ahead; runway holding lines must never be crossed without permission. At some airports, a line of red lights across a taxiway is used during low visibility operations to indicate holding positions. An "interrupted ladder" type marking with an "ILS" sign in white on red indicates a holding position before an ILS critical area.

==Lights==
For night operations, taxiways at major airports are equipped with lights, although many small airports are not equipped with taxiway lighting.

*'''Taxiway Edge Lights:''' used to outline the edges of taxiways during periods of darkness or restricted visibility conditions. These fixtures may be elevated or in-pavement and emit '''[[blue]]''' light normally. Where a four-way intersection crosses, the light at the centre of the crossing may be omnidirectional and emit '''yellow''' light. Where a road for ground vehicles only meets a taxiway or at an end of usable service area for a ramp or taxiway, the light at the edge of the road or the final taxiway edge light may emit '''red''' light. Taxiway edge lights are spaced at a minimum of 50 to a maximum of 200 feet apart. On straightaways, the spacing is typically 200 feet. These lights can be closer together at taxiway intersections.
*'''Taxiway Centerline Lights:''' They are steady burning and emit '''green''' light located along the taxiway centerline. Where a taxiway crosses a runway, or where a "lead-off" taxiway centreline leads off of a runway to join a taxiway, these lights will alternate '''yellow''' and '''green'''. Taxiway Centerline Lights are spaced at either 50 or 100-foot intervals depending on the minimum authorized visibility. On curved taxiway segments, Taxiway Centerline Lights may be required to be closer together.<ref>{{cite web |url=https://www.faa.gov/documentLibrary/media/Advisory_Circular/150-5340-30J.pdf |title=Advisory Circular |date=February 12, 2018 |work=Federal Aviation Administration |at=Page 2-7, Table 2-1 |archive-url=https://web.archive.org/web/20201018144023/https://www.faa.gov/documentLibrary/media/Advisory_Circular/150-5340-30J.pdf |archive-date=October 18, 2020 |url-status=live }}</ref>
*'''Clearance Bar Lights:''' Three in-pavement steady-burning '''yellow''' lights installed at holding positions on taxiways
*'''Runway Guard Lights:''' Either a pair of elevated flashing '''yellow''' lights installed on either side of the taxiway, or a row of in-pavement yellow lights installed across the entire taxiway, at the runway holding position marking at taxiway/runway intersections. 
*'''Stop Bar Lights:''' A row of '''red''', unidirectional, steady-burning in-pavement lights installed across the entire taxiway at the runway holding position, and elevated steady-burning red lights on each side used in low visibility conditions (below 1,200&nbsp;ft RVR). A controlled stop bar is operated in conjunction with the taxiway centerline lead-on lights which extend from the stop bar toward the runway. Following the ATC clearance to proceed, the stop bar is turned off and the lead-on lights are turned on.
<gallery mode="packed">
File:Taxiway-light.jpg|Taxiway Edge Light
File:Taxiway light 1667.JPG|Taxiway Centerline Light (Inset)
File:ATL TWY B - RWY Crossing (13534655025).jpg|Taxiway Lights at Dusk
File:Lufthansa Airbus A319-112; D-AKNH@ZRH;26.11.2012 680bo (8222997035).jpg|Taxiway Lights at Night
File:ATL 12-29-08 (3152114444).jpg|Taxiway Lights at Atlanta
</gallery>

==See also==
*[[Aviation]]
*[[Runway]]
*[[Pavement Classification Number]] (PCN)

==References==
{{Reflist}}

==External links==
*{{commons category-inline}}
* {{cite news |url= http://aviationweek.com/commercial-aviation/tsb-canada-recommends-taxiway-changes-toronto-pearson |title= TSB Canada Recommends Taxiway Changes At Toronto Pearson |date= Feb 4, 2019 |author= Sean Broderick |work= Aviation Week Network}}
* https://www.faa.gov/documentLibrary/media/Advisory_Circular/150-5340-30J.pdf

[[Category:Airport infrastructure]]