File:ILS gauge.svg
Original file (SVG file, nominally 649 × 649 pixels, file size: 5 KB)
Summary
| Description |
English: This is a simple Instrument Landing System on-board gauge. The vertical needle indicates the horizontal position of the localizer beam, in this mode the scale is notched by 1 degrees. At this case the airplane is about 1.6 degrees right of the runway center line. The real measure of the deviation depends on the distance from the ILS zero point. |
| Date | |
| Source |
|
| Author | Fred the Oyster |
| SVG development |  This diagram was created with Adobe Illustrator. |
Licensing
- You are free:
- to share – to copy, distribute and transmit the work
- to remix – to adapt the work
- Under the following conditions:
- attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- share alike – If you remix, transform, or build upon the material, you must distribute your contributions under the same or compatible license as the original.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 11:14, 12 September 2014 | | 649 × 649 (5 KB) | wikimediacommons>Fred the Oyster | some minor corrections |
File usage
The following page uses this file:
